Using Your Machine For The First Time - infaco A3M V2.0 Instructions For Using Manual

48v tying machine
Table of Contents

Advertisement

BEFORE USING YOUR MACHINE FOR THE FIRST TIME
Please read these instructions carefully before using the machine.
The first time you use the equipment, we strongly recommend you to ask the ad-
vice of your dealer, who is qualified to give you all the advice you need for correct
use and optimum performance.
BATTERY
Before using the equipment for the first time and/or putting the battery to sleep
mode, fully charge the battery (see charging procedure on page 11).
The F3015 Lithium battery MUST be recharged using the INFACO
Lithium charger (Ref.: 841C1/841C2).
It is prohibited to use a different charger as this may lead to a serious
electrical accident.
Carrying the Equipment
1. Remove the battery, the battery-holder belt, the suspenders, the holster and
the power cord from the case.
2. Fit the battery onto the battery-holder belt. To do this, slip straps through the
battery tabs. Place the holster on the left or right strap on the battery-holder belt.
3. Slip the power cord through the left or right eye-hole provided in the batte-
ry-holder belt.
4. Fix the battery-holder belt to your waist, the battery must be located in the
lumbar region.
When using suspenders, fix them to the battery-holder belt and adjust them to
your size by pulling on the straps.
In wet weather, it is imperative to carry the battery under waterproof
clothing to keep the battery unit protected from the rain.
6

Advertisement

Table of Contents
loading

Table of Contents