infaco A3M V2.0 Instructions For Using Manual page 17

Charger safety
Temperature fault on channel 1:
Flashing red LED
1. Remove the battery from channel 1 and wait
a few minutes for the battery to cool down.
2. Place the battery on the charger. If the
problem persists, please contact your approved
INFACO dealer.
Temperature fault on channel 2:
Flashing red LED
1. Remove the battery from channel 2 and wait
a few minutes for the battery to cool down.
2. Place the battery on the charger. If the
problem persists, please contact your approved
INFACO dealer.
Defective battery on channel 1:
Red LED on (not flashing)
1.Remove the battery from channel 1 and
connect to channel 2.
2. If the problem persists, remove the defective
battery from the charger and contact your ap-
proved INFACO dealer.
Batterie défectueuse sur la voie 1 : LED
rouge fixe
1. Remove the battery from channel 2 and
connect it to channel 1.
2. IIf the problem persists, remove the defective
battery from the charger and contact your ap-
proved INFACO dealer.
Please remember that the INFACO Lithium charger (Ref.: 841C2/842C2) is
for exclusive use with the F3015 Lithium batteries. It is not suitable for use
with NiMH (Metal hydride) batteries.
Voie 1 :
Voie 2 :
17