General Presentation - infaco A3M V2.0 Instructions For Using Manual

GENERAL PRESENTATION

01. INSTRUCTIONS FOR USE
02. TOOL CARY BAG
03. GREASE SPRAY
04. A3M V2 48V MACHINE
05. PINCERS
06.TYING HEAD UNLOCKING KEY
07 . TYING HEAD
08 . ADJUSTMENT WHEEL
Adjusts the number of turns: 3 to 6 twists.
09 . MULTIFUNCTION CONTROL SWITCH
Short pressure = controls the blade only.
Sustained pressure = controls the tying cycle.
10 . LEVER
Used to activate a roller system to prevent the wire
from moving backwards.
11 . REEL OF WIRE
Wire available in Ø 0.40 / 0.46/ 0.50 /0.55mm.
12 . 48Volts SUPPLY CABLE
5