monospace
SC-2345
SCC
What You Need to Get Started
The Macintosh operating system is not supported.
Note
SCC-DO01 Isolated Digital Output Module User Guide
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.
SC-2345 refers to both the SC-2345 connector block and the SC-2345 with
configurable connectors.
SCC refers to any SCC Series signal-conditioning module.
To set up and use the SCC-DO01, you need the following items:
❑
SC-2345/2350 with one of the following:
–
SCC-PWR01
–
SCC-PWR02 and the PS01 power supply
–
SCC-PWR03 (requires a 7 to 42 VDC power supply, not included)
❑
One or more SCC-DO01 modules
❑
SC-2345/2350 User Manual, available at
❑
SCC-DO01 Isolated Digital Output Module User Guide
❑
SCC Quick Start Guide, available at
❑
Read Me First: Safety and Radio-Frequency Interference
❑
SC-2345 Quick Reference Label
❑
68-pin E Series DAQ device, documentation, and 68-pin cable of less
than 2 m length
❑
1/8 in. flathead screwdriver
❑
Numbers 1 and 2 Phillips screwdrivers
❑
Wire insulation strippers
❑
NI-DAQ (current version) for Windows 2000/NT/XP/Me
ni.com
2
ni.com
ni.com