Configuration
Configuring
To be able to configure the communications processor, the following engineering or
configuration tools are available:
● STEP 7 V5.5
● STEP 7 Professional (TIA Portal)
● Communication Settings (COML S7)
The steps involved are described in the "Commissioning PC Stations" manual or in the
relevant online helps.
NOTICE
No downloading of a CP 5613 A2 slave configuration to a CP 5614 A2
A DP slave configuration for a CP 5613 A2 must not be downloaded to a CP 5614 A2
because the DP slave will not work with this configuration.
CP 5613 A2/CP 5614 A2
Operating Instructions, 08/2016, C79000-G8976-C301-02
5
21