Safety Instructions - infaco Powercoup PW2 User Manual

SAFETY INSTRUCTIONS

BEWARE! In order to reduce the risk of electrical discharge, injury and fire during the use
of electrical tools, please observe the following basic safety measures. Read and follow
these instructions before using the tool, and keep these safety instructions !
When not in operation, the POWERCOUP PW2 handle and its accessories must be
disconnected and stored in their case.
PW2 POWERCOUP handle must always be disconnected from all power
sources to the following :
- Servicing.
- Charging the battery
- Maintenance.
- Transport.
- Storage.
While the tool is in operation, always remember to keep hands away well away from the
accessory being used.
Do not use the tool if you are tired or feeling unwell.
Wear recommended safety equipment specific to each accessory.
Do not leave the tool within the reach of children or visitors.
Do not use the tool if there is any risk of fire or explosion- for example in
the presence of flammable liquids or gas.
Never carry the charger by its power cord, and so not pull on the power
cord to unplug it.
Keep the power cord away from heat sources, oil or sharp edges.
Never use the tool at night or in poorly lit conditions without setting up extra
lighting.
While using the tool, make sure you keep both feet on the ground and stay well-
balanced.
Be careful – the extension poles and rake are made out of carbon – a
conductive material. Do not use near electrical wires or other power
sources.
13