infaco Powercoup PW2 User Manual page 8

1 Start : 2 short pulls of the trigger = ON
Standby output : 2 short pulls of the trigger = ON
Normal operation : 1 long pull of the trigger = ON
10 speed increments available between 320 and 1900 r/min
A/
Start the machine
C/
x10 short pulls
Select the requested speed with successive short pulls on the trigger. 10 speed
increments available.
Validate the requested speed and exit the set-up mode with a long pull on the
trigger until the machine stops completely.
The machine is ready to work, the speed will be locked until the next set-up.
The tool is fitted with an electronic protection system. As soon as the rotor becomes
blocked due to meeting strong resistance, the electronic system causes the motor to stop.
2
Releasing the trigger = OFF
SETTING OF ROTATION SPEED
ON
2
(x3)
B/
To enter the set-up mode, do a long pull
on the trigger.
The machine starts automatically at the
first increment on low speed.
x1 long pull
8