60 cm 4 burner glass gas hob with thermocouples 70 cm 5 burner gas glass hob with thermocouples 60 cm 4 burner glass gas hob 70 cm 5 burner glass gas hob (32 pages)
Page 1
P61SS/P62SS Pythagora 60cm gas hob P67SS/P68BL/P68SS Pythagora 70cm gas hob...
Page 2
User Manual for your Baumatic P61SS/P62SS Pythagora 4 burner 60cm gas hob P67SS/P68BL/P68SS Pythagora 5 burner 70cm gas hob NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
Contents Environmental note Important safety information 5 – 7 Specifications Product & Aperture dimensions Product specifications Standard accessories Electrical details Gas details Gas hob surface layout Using the gas hob Before first use Turning the hob on Automatic electric ignition Energy saving tips Cleaning Cleaning the hob top...
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may fuse to the surface.
Page 6
Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
Page 7
If the appliance is being used in a Leisure Accommodation Vehicle, the requirements of N 721 MUST be followed. o Baumatic Ltd. DO NOT recommend that this appliance is installed on any type of marine vessel. Declaration of conformity This appliance complies with the following European Directives: -73/23/EEC dated 19/02/1973 Low Voltage Directive.
Specifications P61SS & P62SS Product dimensions: Height: 500 mm Width: 585 mm Depth: 35 mm Aperture dimensions: Height: 480 mm Width: 560 mm P67SS & P68BL/SS Product dimensions: Height: 500 mm Width: 685 mm Depth: 35 mm Aperture d imensions: eight: 480 mm Width:...
Gas details onnection: Rp ½ (ISO R7) Type: Natural Gas (20. 9 mbar), alternative LPG G30 (28-30 mbar), town gas G110 – 120 (8 mbar) to order. or future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.
sing the gas hob IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). The following symbols will appear on the control panel, next to each control knob: lack circle: gas off arge flame: maximum setting mall flame: minimum setting o The minimum setting is at the end of the anti-clockwise rotation of the control knob.
er y saving tips The diametre of the bottom of the pan should corre spond to that of the burner. The burner flame must never exte nd beyond the diametre of the pan. Use fl at bottomed pans only o When possible, keep a lid on the pan whilst cooking.
leaning Cleaning operations must only be carried out when e hob is cool. The appliance sh ould be disconnected from your ains supply before commencing any cleaning process. Cleaning the hob top Any residues that a re left on the hob top surface from cleaning gents will damage it.
Electricity at Work Regu lations BS 6172 o Installation of Domestic Gas Cooking App liances (if necessary, BS 5482 Installation of Domestic LPG Appliances) BS 5440 Installation of Flues and Ventilation for Ga s Appliances o Baumatic Ltd Installation Instructions...
ositioning adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in, during periods of use. This appliance can be l ocated in a kitchen, a kitchen diner or a bed sitting room.
When unpacking the applian ce please check that the following items re contained within the packaging: 1 x Baumatic hob x Pan supports 4 x Burner assemb lies 1 x Installation an d instruction manual 1 x Baumatic guarantee...
Page 16
o Carefully turn the hob upside down and place it on a cushioned mat. Apply the sealing strip (A) provided around the edge of the appliance. The protective cove ring must be removed from both sides. o Do not leave a gap in the sealing agent or overlap the thickn ess.
Conversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Technical Depar tment. The cooker must be installed by a qualified person, in...
entilation requirements o The room containing th e cooker should have an air supply in accordance with the current edition of BS 5440: Part 2: The room must have opening windows or equivalent; som rooms may also require a permanent vent. If the room has a volume between 5 and 10m ³, it will require an air vent of 50cm²...
as Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas upply by use of a ½ BSP Elbow, seal, copper pipe and an isolation tap fitted in an easily accessible position. o It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety Installation and Use Regulations.
as adjustment (Conversion to LPG) All work must be carried ou t by a CORGI registered ngineer. IMPORTANT: Always isolate the cooker from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. o Remove the pan-stands, burners and flame spreaders (A).
Minim m flow adjustment for hob gas taps. All work must be carried out by a CORGI registered ngineer. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. o Switch the burner on and set the knob at the...
as tap maintenance These mainte nance operations MUST ONLY be carried ut by a CORGI registered engineer. IMPORT ANT: Before carrying out any mainten ance operations, disconne t the appliance from the gas and electricity supplies. If a gas tap becomes stiff to operate, then you should proceed as follows: o Remove the control knobs, pan supports, burners, hob fix screws and clamps.
If the mains supply cable is damaged, then it must be replaced by an ppropriate replacement which can be obtained from the Baumatic Spares Department. The mains supply cab le should be replaced in accordance with the...
Need help?
Do you have a question about the Pythagora P62SS and is the answer not in the manual?
Questions and answers