Replacing Spark Plug Cap And Coil - Yamabiko ECHO PB-2520 Service Manual

20

4-4 Replacing spark plug cap and coil

A
A
C
IGNITION SYSTEM
B
Coat with small
amount of oil
B
1. Disconnect spark plug cap (A) from spark plug.
2. Apply some oil in spark plug cap (A) for easy re-
moval from high tension lead (B).
3. Pull spark plug cap away from high tension lead.
4. Inspect spark plug cap coil (C) for corrosion
and correct connection. Inspect spark plug cap for
cracks. Replace as required.
NOTE: Make sure spark plug cap coil (C) contacts
center core of high tension lead when reinstalling
it.
5. Coat end of high tension lead (B) with small
amount of oil, and insert it into spark plug cap (A)
as shown, until the spark plug cap coil is properly
seated in the cap.
PB-2520
EB252