PB-2520
EB252
2-4 Assembling starter
a1
A
A
C
a2
STARTER SYSTEM
B
A
b
a2
1. Assemble rope reel (A) engaging hook (a1) with
hook (b) of rewind spring (B).
2. Check for proper engagement of rewind spring
and rope reel (A) by turning rope reel (A) clockwise
and counterclockwise.
3. Reinstall screw (C) with the washer on starter
post.
4. Pull out starter rope inside of starter case. Ro-
tate rope reel counterclockwise several turns with
starter rope hooked at notch (a2) as shown. Hold
rope reel to prevent it from unwinding and pull out
starter grip to take the rope slack.
5. Pull starter several times to check rewind spring
tension. If starter is not rewinding fully, increase
spring tension by rotating rope reel one more turn
counterclockwise following above step 4.
6. Pull out starter rope all the way, and check that
rope reel can be rotated an additional half or more
turn counterclockwise as shown, to prevent rewind
spring from breaking.
7. If rope reel can not be turned counterclockwise,
reduce tension by rotating rope reel clockwise one
turn with starter rope hooked at notch (a2).
11