Replacing Starter Rope - Yamabiko ECHO PB-2520 Service Manual

PB-2520
EB252

2-2 Replacing starter rope

C
B
D
STARTER SYSTEM
1. Pull out knot (A) from starter grip and untie knot
(A).
2. Pull knot (B) to remove rope from rope reel (C).
A
3. When installing a new starter rope, singe both
ends of the rope to prevent fraying.
D
4. Make a knot (D) at end of starter rope and pass
the rope through hole of rope reel, then press the
knot (D) into recess as shown.
E
5. Pass the other end of starter rope through start-
er case, from inside to outside.
6. Pass starter rope through starter grip (E). Make
a knot as shown.
7. Tighten knot. Push knot into recess (e) of starter
grip.
e
9