peerless-AV PSTA-028 Installation And Assembly Manual
Universal projector wall arm
Hide thumbs
Also See for PSTA-028:
- Installation and assembly manual (9 pages) ,
- Installation and assembly manual (9 pages) ,
- Installation and assembly manual (9 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for peerless-AV PSTA-028
Summary of Contents for peerless-AV PSTA-028
- Page 1 Installation and Assembly: Universal Projector Wall Arm Models: PSTA-028, PSTA-028-W, PSTK-028, PSTK-028-W Max UL Load Capacity: 50 lb (22.7 kg) 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-8 04-25-13...
-
Page 2: Table Of Contents
Installation to Wood Stud ..............................4,6 Installation to Solid Concrete/Cinder Block ........................5,7 Assembly of Adjustment Tube ...............................8 Installing Projector Mount ..............................8 Routing Cables ..................................9 2 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14... -
Page 3: Parts List
— — 520-9207 520-2047 M 5/16 - 18 serrated flanged lock nut — — 530-1016 530-2016 NOTE: Some parts may appear slightly different than illustrated. 3 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14... -
Page 4: Installation To Wood Stud
Installation to Wood Stud Walls for PSTA-028, PSTA-028-W Models WARNING • When installing Peerless wall mounts on a wood stud wall covered with gypsum board (drywall), verify that the wood studs are a minimum of 2" x 4" nominal size. Do not install over gypsum board thicker than 5/8". -
Page 5: Installation To Solid Concrete/Cinder Block
• Never tighten in excess of 80 in • lb (9 N.M.). Tighten all fasteners. SOLID CONCRETE CINDER BLOCK Illustration A 5 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14... -
Page 6: Installation To Wood Stud
(K) to wood stud using four #14 x 2-1/2" wood screws (E) as shown. Optional: Rotate wall arm 180 ° to position the arm closer to the ceiling. 6 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14... - Page 7 • Never tighten in excess of 80 in • lb (9 N.M.). Tighten all fasteners. SOLID CONCRETE CINDER BLOCK Illustration A 7 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14...
-
Page 8: Assembly Of Adjustment Tube
Installing PRGS projector mount to wall arm assembly: Attach PRGS projector mount (J) to carriage (B) using two 1/4-20 phillips screws (H) and two flat washers (I) as shown below. 8 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14... -
Page 9: Routing Cables
Note: Follow projector mount (PRGS) instructions to install projector. PROJECTOR CABLES 9 of 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 03-23-09 SHEET #:055-9260-9 05-23-14 © 2013, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.