Mobile Access Portal (Map) Gateway - Johnson Controls MAP 1810 Quick Start Manual

ENGLISH - Quick Start Guide
the MAP Gateway is configured to dynamically receive
an IP address from your network using DHCP. If the IP
address does not appear, refresh the screen.
e. Enter this IP address in your browser address bar to
access the MAP Gateway over an Ethernet network.
Refer to the Mobile Access Portal Gateway Network and
IT Guidance Technical Bulletin (LIT-12012015) for more
options.
7
Use the MAP Gateway
Select a device from the equipment list and use the web
pages from the MAP Gateway to view, commission and
configure devices as needed.

Mobile Access Portal (MAP) Gateway

MAP Gateway is a pocket-sized web server that
leverages the power of mobile connectivity to maximize
productivity for daily operations.
• Commission, configure and access building automation
equipment using Wi-Fi-enabled devices such as smart
phones, tablets, and laptops.
• Change and configure setpoints, parameters and
schedules. View alarms and trends through an HTML5
browserbased interface.
• Use as a portable device (and carry from site to site as
needed) or permanently mount on site.
IMPORTANT: Keep your MAP Gateway in the
protective shell or stationary cradle with which it
shipped. This may help protect the unit if it is dropped.
IMPORTANT: Save this guide. It contains default user
name and password information that may be needed
to reset your MAP Gateway to factory defaults.