Table of Contents
Advertisement
PRECAUTIONS:
WARNING:
Caution:
WARNING:
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer's instructions.
WARNING:
Do not touch any circuit board, power device or electrical connection
before you first ensure that power has been disconnected and there is no
voltage present from this equipment or other equipment to which it is
connected. Electrical shock can cause serious or fatal injury.
WARNING:
Be sure that you are completely familiar with the safe operation of this
equipment. This equipment may be connected to other machines that
have rotating parts or parts that are controlled by this equipment.
Improper use can cause serious or fatal injury.
WARNING:
Be sure all wiring complies with the National Electrical Code and all
regional and local codes or CE Compliance. Improper wiring may cause a
hazardous condition.
WARNING:
Be sure the system is properly grounded before applying power. Do not
apply AC power before you ensure that grounds are connected. Electrical
shock can cause serious or fatal injury.
Caution:
The safe integration of the drive into a machine system is the
responsibility of the machine designer. Be sure to comply with the local
safety requirements at the place where the machine is to be used. In
Europe this is the Machinery Directive, the ElectroMagnetic Compatibility
Directive and the Low Voltage Directive. In the United States this is the
National Electrical code and local codes.
Caution:
Electrical components can be damaged by static electricity. Use ESD
(electro-static discharge) procedures when handling this control.
1-2 Product Overview
Classifications of cautionary statements.
Indicates a potentially hazardous situation which, if not avoided,
could result in injury or death.
Indicates a potentially hazardous situation which, if not avoided,
could result in damage to property.
MN1272
Advertisement
Table of Contents
