Connecting An Htl Incremental Encoder - Siemens SIMOTICS M-1PH8 Series Operating Instructions Manual

Connection
5.2 Electrical connection
Figure 5-13
A suitable socket connector can be used to rotate the angle plug. Make sure that the socket
connector is completely secure to avoid damaging the pin contacts.
5.2.8

Connecting an HTL incremental encoder

Encoder connection with terminal block using an additional terminal box
Induction motors can be equipped with an additional terminal box. This means that you can
connect the following HTL incremental encoders for operation with a SINAMICS G via a
terminal block:
● HTL1024 S/R and
● HTL2048 S/R
The additional terminal box is shown in the following diagram.
96
Signal connection (view of connector pins)
1PH808/1PH810 main motors
Operating Instructions, 04/2017, 610.48004.40f