Operation - Kogan SmarterHome KASHFNGDLKA Quick Start Manual

OPERATION

Deadbolt function
To activate the dead-bolt, lift up on the door handle.
Adding administrators
The first 2 added users will be classified as administrators and cannot
be removed unless lock is reset.
button, while is used as the confirm button.
1. Remove the battery cover, short press Set (back panel) or long
press . The voice will prompt "Please add administrator."
2. Add the administrator's fingerprint (3 times to confirm), card, or
password (6-8 numbers, twice to confirm) followed by .
3. The voice will say "added successfully."
NOTE
Different position fingerprints can be added to improve the
fingerprint identification rate.
Adding users
An administrator is required to verify and assist in adding another user.
1. Remove the battery cover, short press Set (back panel) or long
press . The voice will prompt "Please verify the administrator."
2. Verify administrator by confirming fingerprint, card, or password.
3. Add the new user's fingerprint (3 times to confirm), card, or
password (6-8 numbers, twice to confirm) followed by .
4. The voice will say "added successfully."
Deleting users
1. Remove the battery cover, short press Set (back panel) or long
press . The voice will prompt "Please verify the administrator."
2. Verify administrator by confirming fingerprint, card, or password.
3. Short press Set or long press
4. Press 1 to remove all user fingerprints, 2 to remove all user
passwords, 3 to remove all user cards, or 4 to remove all users.
5. Upon entering a selection, the voice will say "Successful."
NOTE
The administrator cant be removed by doing this, only normal users.
To remove administrators, factory reset is required.
12
is used as the back and sign out
again.