Kogan SmarterHome KASHFNGDLKA Quick Start Manual page 10

INSTALLATION (cont'd)
6. Installing the lock (continued)
6.2 Rear panel
a. Press the front panel and connect the connection line with the
corresponding interface of the back panel, then insert the excess
line into the door hole.
b. Insert the back-locking paddle into the lock body. You can cut off
one or two sections of the back-locking paddle according to the
thickness of the door.
NOTE
The length of the back-locking paddle should not exceed the
thickness of the door.
c. Align the square steel with the square steel hole of the back panel
and compress the back panel.
d. Lock with 2 connection column screws to fix the back panel.
e. Install 4x AA batteries and the battery cover, then lock the battery
cover with the screw.
NOTE
When installing the back lock, look through the screw hole and make
sure the connection wire is not blocking the connection column hole
to avoid damaging the connection wire when installing the screw.
10