Kogan SmarterHome KASHFNGDLKA Quick Start Manual page 13

Change password
1. Press 7 and , you will hear a long beep from the lock.
2. Enter the old password that is to be changed. The voice will
prompt "Please add user."
3. Enter the new password, followed by . The voice will then say
"Successful." The previous password will now be invalid.
Factory reset (Restore to default settings)
1. Remove the battery cover, long press Set for 3 seconds and verify
the administrator.
2. The system will restore itself to factory default settings.
NOTE
Following a factory reset, all user and administrator information is
erased. The password will return to the default 1-2-3-4-5-6-7-8-9-0.
Add a new administrator immediately.
Self-locking
If the password is entered incorrectly 5 times in a row, the system will
be locked for 180 seconds (3 minutes). Using the fingerprint or card will
override the self-lock.
If the fingerprint is entered incorrectly 5 times in a row, the system will
be locked for 180 seconds (3 minutes). Using the card will override the
self-lock.
Low power warning
When the battery power is lower than 4.6v, the lock will enable.
Replace the batteries immediately. Do not mix brands, or new and used
batteries.
Virtual password (anti-peeping protection)
Enter a virtual password before or after the correct password and it can
then be unlocked. Do not exceed 30 digits, and ensure the correct code
is entered in a continuous sequence.
Doorbell function
Press while in standby or initial state to sound the doorbell.
Volume adjustment
Press 3-3-3 followed by
and high.
to change volume from mute, low, medium
13