Kogan SmarterHome KASHFNGDLKA Quick Start Manual page 7

4. Installing lock body
Set the installation direction of the latch-bolt in the lock body according
to the door opening direction. Check back to step 1 if you are unsure.
To change the direction of the lock body:
a. Push the reversing block to the other side.
b. Push the latch-bolt into the lock and turn it 180 degrees.
c. Put back the reversing block and the latch-bolt will pop up
automatically.
Following this, place the lock body into the door frame and tighten with
2 fixing screws.
NOTE
Don't forcefully unlock by heavily pressing down the lock handles
while reversing lock body set.
Lock Body (5052)
Latch-bolt
Dead-bolt
Square steel hole
Reversing block
7