Kogan SmarterHome KASHFNGDLKA Quick Start Manual page 6

INSTALLATION (cont'd)
2. Open hole
Following the hole installation template, drill the holes in your door to
facilitate installation. If you require another installation template, these
are available as a free download from kogan.com
3. Changing the handle direction
Check if the handle direction is appropriate for the door (facing left or
right). If it is correct, continue on to step 4.
If is not the correct direction, this can be changed via the following:
a. Front handle direction change
Disassemble the direction-changing screw, carefully and slowly twist
the handle clockwise 180°, then re-tighten the direction-changing
screw. Check that the handle is not stuck in place, and can be
turned easily.
b. Rear handle direction change
Disassemble the direction-changing screw, carefully and slowly twist
the handle clockwise 180°, then re-tighten the direction-changing
screw. Check that the handle is not stuck in place, and can be
turned easily.
c. Match the front handle and back handle to make sure they are in
the correct direction.