Kogan SmarterHome KASHFNGDLKA Quick Start Manual page 11

7. Installing buckle plate and buckle box
Following the hole installation template (see Step 2), drill the holes in
your door frame for the buckle box. Position the buckle box first, before
the following with the buckle plate.
Ensure the buckle plate is installed with the door guard facing door's
swing direction.
8. Installation Debugging
Double check all of the following points before finalising your
installation. This will ensure that installation has been performed
correctly, and that your door lock will perform as intended. Keep the
door in a half-open status while debugging.
a. Check whether the following functions can be achieved or not:
• Press down front handle: latch-bolt/dead-bolt remains locked in locked
status.
• Press down front handle: latch-bolt/dead-bolt retract in unlocked
status.
• Lift up front handle: enable dead-bolt in any status.
• Press down back handle: latch-bolt/dead-bolt retract in any status.
• Lift up back handle: enable dead-bolt in any status.
b. When locking in reverse direction from inside, press down the front
handle/back handle, the latch-bolt/deadbolt should not move.
c. Verify other functions are normal or not, including self-locking,
virtual password, setting button, app remote unlocking etc.
11