Advertisement
BEFORE STARTING
NOTE
Please have a Phillips-head screwdriver and 4x AA batteries on hand before
commencing installation.
Please read the following before starting:
• It is recommended to have this installed by a professional.
• Please note that the connection line should not be pressed, bent or
folded during installation.
• Before the installation, ensure the lock is suitable for the door, or the
direction of the handle must be adjusted according to the door opening
direction.
• While installing, the door must be in a half-open state until the
installation is complete.
• After the installation is complete, test whether the front handle and
back handle unlock/lock normally.
• If it does not work properly, please check if there has been an error
during installation, and consult the Installation Troubleshooting steps
on page 11. If still experiencing difficulty, head online to Kogan.com's
help centre at help.kogan.com
3
- Quick Links:
- Operation
- Troubleshooting
Hide quick links:
Advertisement
