Daikin BACnet Series Installation Manual page 23

Procedure
Calibrate the inputs
Set the display blanking
Lockout user buttons
IO-DAPPS
Steps
Choose CALIBRATION from the ADVANCED menu to calibrate an
input. The BACnet™ Thermostat includes two calibration entries;
one for the internal temperature sensor and one for the optional
remote temperature sensor connected to the RS terminal.
Enter a calibration factor to adjust either input for
sensor inaccuracies.
• For a low input reading enter a positive correction value
• For a high input reading enter a negative correction value
Choose DISPLAY from the ADVANCED menu to set the display
appearance after the last button is pushed.
• BLANKING – Choose one of the blanking options
— CLOCK – An analog clock replaces the temperature and
mode icons
— BACKLIGHT OFF – The display brightness changes to the level
set by DIM LEVEL after the last button interaction
— NONE – The temperature and mode icons always
remain visible
• DIM LEVEL – Sets the level of brightness of the display back light
if BACKLIGHT OFF is the selected blanking option
Choose KEY LOCKOUT from the ADVANCED menu to limit the
accessibility to users with only Password 1, the user password.
• MODE/SETPOINT – Users with Password 1 cannot change any
value or mode
• MODE – Users with Password 1 cannot change the heating/
cooling, fan, or occupancy modes
• NONE – Users with Password 1 have full access to active
setpoints, heating/cooling, fan, and occupancy modes
www.daikinac.com
Program Set-Up
Display
23