Advanced Options - Daikin BACnet Series Installation Manual

Program Set-Up

Advanced Options

Use the advanced options to set up the following items.
• Choosing an application and units of measure.
• Adjusting the PID loops
• Changing passwords
• Calibrating inputs
• Setting the display banking
• Modifying access to users with Password 1.
Setting the advance options requires entering Password 2.
Table 13: Advanced Options
Procedure
Starting display
Choose the ADVANCED menu
Reset the application and choose units of measure
Adjust the PID loops
Enter or change passwords
IO-DAPPS
Steps
1. Start at the temperature display.
2. Enter Password 2. The display changes to the MAIN menu display.
1. From the MAIN menu, press either the ▲ or ▼ button to
select ADVANCED.
2. Press Enter. The ADVANCED menu opens.
3. Choose any of the following functions
• RESTORE APP
• LOOPS
• PASSWORDS
• CALIBRATION
• DISPLAY
• KEY LOCKOUT
Choose RESTORE APP from the ADVANCED menu to reset the
BACnet™ Thermostat to the original configuration and settings.
Use it also to change the BACnet Thermostat application program
and the units of measure to display. There are two version of each
application program in every BACnet Thermostat.
• The Metric version displays temperature in Celsius and uses
metric values for units of measure
• The English version displays temperature in Fahrenheit and uses
English values for units of measure
NOTE: Choosing an application will reset the BACnet Thermostat.
Choose LOOPS from the ADVANCED menu to adjust the values for
the cooling or heating PID loops. Only the proportional and integral
properties can be changed from the display.
• The proportional default is 2°F.
• The integral default is zero (0).
Choose PASSWORDS from the ADVANCED menu to set either
Password 1 or Password 2
• Password 1 is for a facility user and limits changes to active
setpoints, fan operation, occupancy, and heating and
cooling modes
• Password 2 is for a controls technician to set up and commission
the BACnet Thermostat
NOTE: Entering four zeros (0000) removes the password.
The BACnet Thermostat is supplied without passwords.
1. From the PASSWORD1 or PASSWORD2 menu press either the ▲
or ▼ button to change the first digit of the password.
2. Press the Enter button to select the next digit. Repeat for all
four digits.
3. When the Enter button is pressed for the last digit, the new
password is saved and the display advances.
www.daikinac.com
Display
22