Mitsubishi Electric Apricot LS340 Owner's Handbook Manual page 37

5.
Now, when the computer is next turned on or rebooted, the user is
required to enter the password. If the Password Prompt option is set
On, the following prompt is displayed:
If the Password Prompt option is set Off, the user is not prompted
at all. The computer will boot — or if
the BIOS Setup utility will start — and then wait for the user to
type the password and press
users of the computer are told to expect this, or they may think that
the computer has stopped working.
The user is allowed three attempts to enter the correct password. If
she fails, the system is "locked" and must be turned off. Turning the
computer on again restarts the sequence.
To delete a power-on password:
1.
2.
Administrator Password
An administrator password works in exactly the same way as a
power-on password. If you define both an administrator and a
power-on password, the computer accepts only the administrator
password.
U s i n g t h e B I O S S e t u p U t i l i t y
A dialog asks you to confirm that you want to replace any
existing power-on password.
Press to confirm (or
ENTER
Type your password, then press Enter.
In the Power-on Password dialog, choose the Delete Power-on
Password option.
A dialog asks you to confirm that you want to delete the
existing power-on password.
Press to confirm.
ENTER
APRICOT LS/VS340 OWNER'S HANDBOOK
otherwise).
ESC
1 is pressed during start-up
F
. It is important that authorised
ENTER
3/9