Table of Contents
Advertisement
use, but must know about them so as to automatically configure any
"Plug and Play" devices and PCI cards to avoid resource conflicts.
There is a separate option for each resource: memory, I/O ports,
DMA channels and interrupts. (See the chapter entitled "Adding
Expansion Cards" for more information about the resources used by
expansion cards.)
Each item shown as Plug and Play is assumed not to be in use by
any ISA card or device, and will therefore be made available for the
PCI auto-configuring process.
Error Log
The last three errors reported during the POST routine are recorded
in the error log. You can clear the error log by choosing the Clear
Error Logs option.
Power Management
These power management features aim to reduce the average
amount of electricity consumed by your computer. Some power
management features are enabled in our factory to ensure
compliance with the Energy Star programme. For more information
about Energy Star, see the Windows Help file pre-installed on your
hard disk.
Caution
The monitor supplied with your computer is designed to work with
these energy-saving features. If you want to use another monitor, make
sure that it supports DPMS; if it doesn't, it may be permanently
damaged.
Power Management Feature
Use this option to disable or enable the power management feature.
Time Till (Automatic) Power Saving
If this option is not Disabled, computer will go into a low-power
Standby mode after the specified period of inactivity. The processor
U s i n g t h e B I O S S e t u p U t i l i t y
APRICOT LS/VS340 OWNER'S HANDBOOK
3/13
Advertisement
Table of Contents
Troubleshooting
