Mitsubishi Electric Apricot LS340 Owner's Handbook Manual page 76

4.
When you have finished, replace the removable-media drive tray
you removed earlier, then replace the system unit cover.
Reconfiguring the system
The first time you turn on the computer after adding or removing
SIMMs, the power-on self-test (POST) detects the change in
configuration. All you have to do is confirm the new configuration
in the BIOS Setup utility (see the chapter on "Using the BIOS
Setup Utility" for more information).
Do not use excessive force. If the SIMM will not fit easily,
remove it and start again.
Repeat these steps for each SIMM you want to install.
APRICOT LS/VS340 OWNER'S HANDBOOK
U p g r a d i n g
7/7