Ibat Networking Configuration - Huawei iBAT 2.0-CIM01C2 User Manual

iBAT 2.0-CIM01C2
User Manual
Context
To meet the requirement that the number can be adjusted freely, the iBOX will assign a
number (1–300) to each iBAT that requests network entry.
On the iBOX WebUI, choose Monitoring > iBOX System > Running Control > Net Join
Config. There are five configuration methods: Insert an iBAT, Replace an iBAT, Delete an
iBAT, Batch-replace iBATs , and Switch iBAT No..
Inserting an iBAT
Figure 7-1 Inserting an iBAT
Reference No.: Indicates the reference node number corresponding to the operation type.
Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose
Insert an iBAT and set Reference No. to 2. After the operation, number 2 is reserved, and the
iBAT numbers 2 and 3 change to 3 and 4 respectively.
Figure 7-2 Schematic diagram
Issue 07 (2019-01-02)
7

iBAT Networking Configuration

Copyright © Huawei Technologies Co., Ltd.
7 iBAT Networking Configuration
52