Huawei iBAT 2.0-CIM01C2 User Manual page 21

iBAT 2.0-CIM01C2
User Manual
BIM
BIM01C3
BIM02C1
Appearance
Figure 2-8 BIM appearance
(1) RUN/ALM indicator
Issue 07 (2019-01-02)
Description
 When the battery supply voltage is lower than 9.6 V for more than 30
minutes, the BIM automatically powers off.

When the BIM communication has failed for more than 30 minutes and the
battery voltage is lower than 12.6 V, the BIM automatically powers off.
 When the BIM has not been networked successfully in more than two days
after power-on and the battery voltage is lower than 12.6 V, the BIM
automatically powers off.
 When the battery supply voltage is lower than 1.6 V for more than 30
minutes, the BIM automatically powers off.
 When the BIM communication has failed for more than 30 minutes and the
battery voltage is lower than 2.1 V, the BIM automatically powers off.

When the BIM has not been networked successfully in more than two days
after power-on and the battery voltage is lower than 2.1 V, the BIM
automatically powers off.
(2) Networking switch
Copyright © Huawei Technologies Co., Ltd.
2 Overview
(3) Panel port (4) Fastener
15