Huawei iBAT 2.0-CIM01C2 User Manual page 23

iBAT 2.0-CIM01C2
User Manual
Indicator
Alarm
Networking Switch
Table 2-15 Networking switch description
Name
Button pressing
Button holding
down
Issue 07 (2019-01-02)
Color
Red

If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.

If both the red and green indicators light up at the same time, orange effect may be generated.
Definition
Press the button for less
than 5s.
Hold down the button
for more than 5s.
Copyright © Huawei Technologies Co., Ltd.
Silk Status
Screen
ALM Off
Blinking at
super short
intervals
Steady on
Function
Searches for and joins a network if there is no
network. Initializes parameters of a network
if there is a network.
Clears the present network and resets the
wireless module.
Description
The BIM is not faulty.

Network parameters are being
cleared.
 The BIM is blinking.

The BIM is measuring the
battery internal resistance.
 The BIM is faulty.

Communication with the CIM
times out.
 No network is connected. (The
BIM is waiting to connect to a
network.)
2 Overview
17