Leds Definition - Acksys RailBox Series Quick Installation Manual

11 to 19 LEDs according to the models.
The statuses LED indicate:
LED Color
Power 1 Green
Power 2 Green
Red/
Diag
Green
LAN 1 Green/
LAN 2 Yellow
Red/
C-KEY
Green
State Green
Activity Blue
Signal
Green
Strength

LEDs definition

This LED is ON when
a power supply is connected to pins 3 & 4 of the
power connector
a POE+ injector is connected to LAN2
This LED is ON when a power supply is connected
to pins 1 & 2 of the power connector
This led indicates the unit operational state.
OFF: Power supply is off
Red: Initialization during 40s after power is
applied then goes Green
Red for more 120s: hardware failure
Green: Ready to use
Blinking: Firmware in flash is loading or not valid;
please load new firmware with NDM
On: Link on LAN established
Flashing: Tx/Rx activity
Yellow: connected in 1000 BASE T
Green: connected in 100 BASE Tx
or 10 BASE T
Off: Link on LAN broken
Off: C-KEY in factory state
Red: the C-KEY is not detected, data is
invalid or corrupt
Green: the C-KEY data is valid
Blinking: during reads and writes to the C-KEY
Off: the radio is disabled
Blinking: the product is unassociated
solid "On": the product is associated
Flashing: Radio Tx/Rx activity
In client mode: once connected, represents the
power of the radio signal received from
the AP
In AP mode: Always off
-7-
Description