Switching Between Two Channels Using Channel Return; Switching Between Two Channels Using Surflock; Selecting The Picture Size - Toshiba 40RV525U Owner's Manual

Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (
channel).
3
Press on the remote control. The previous channel
will display. Each time you press
back and forth between the last two channels that were
tuned.
Note: If you press
will return to the last-viewed input.
Switching between two channels using
SurfLock™
The SurfLock™ feature temporarily "memorizes" one channel
to the button, so you can return to that channel quickly
from any other channel by pressing
channel to the button:
1
Tune the TV to the channel you want to program into the
button.
2
Press and hold for about 2 seconds until the message
"Memorized" appears on-screen. The channel has been
programmed to the
3
You can then change channels repeatedly, and when you
press , the memorized channel will be tuned.
The TV will return to the memorized channel one time only.
Once you press and then change channels again, the CH
RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the
last two channels that are tuned.This feature also works for
external inputs.
Chapter 6: Using the TV's features
) button if selecting a digital
, the TV will switch
from a non-antenna input, the TV
. To memorize a
button.

Selecting the picture size

You can view many program formats in a variety of picture
sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide
3, Full, 4:3 HD, Native and Dot by Dot (available in PC Mode
Only).
Note: The "picture size" illustrations are examples only. The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.
You can save separate picture size preferences for each input
on your TV.
To select the picture size using the remote control:
1
Press on the remote control.
2
While the Picture Size screen is open, you can do one of
the following to select the desired picture size:
Repeatedly press
•
Press the corresponding Number button (0–6) while the
•
Picture Size screen is open.
while the Picture Size screen is open.
Press or
•
To select the picture size using the menus:
1
Select Picture Size in the Theater Settings menu.
2
Press or to select the desired picture size setting.
3
Highlight Done and press
Note: Some of the picture sizes may not be available
depending on the receiving signal format (those will be
"grayed out" in the Picture Size screen).
Using these functions to change the picture size (i.e.,
changing the height/ width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
Note: If you select one of the TheaterWide
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only) or try viewing
the program in Full or Natural picture size.
.
.
® picture sizes, the
39