Adjusting The Audio Quality; Selecting The Optical Audio Output Format; Using The Dolby Digital Dynamic Range Control Feature - Toshiba 40RV525U Owner's Manual

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1
and open the Audio menu.
Press
2
Highlight Audio Settings and press
3
Press or to highlight the item you want to adjust
(Bass, Treble, or Balance).
4
Press or to adjust the level.
makes the bass or treble weaker or increases the
•
balance in the left channel (depending on the item
selected).
makes the bass or treble stronger or increases the
•
balance in the right channel (depending on the item
selected).
5
To save the new settings, highlight Done and press
To reset the settings to the factory defaults, highlight
Reset and press
.

Selecting the optical audio output format

You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on the
TV (see "Connecting a digital audio system" on page 19).
To select the optical audio output format:
1
and open the Audio menu.
Press
2
Highlight Audio Setup and press
3
In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device.
4
To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and
press .
Chapter 6: Using the TV's features
.
.
.
.
Using the Dolby ® Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
ATSC to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1
and open the Audio menu.
Press
2
Highlight Audio Setup and press
3
In the Dolby Digital Dynamic Range Control field, select
Compressed. When Standard is selected, the audio is
output with minimal compression.
4
To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and
press .
Note:
• This item will be grayed out for NTSC signals, Video,
ColorStream, and PC inputs.
• The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
.
.
45