Using Cableclear Digital Noise Reduction; Using Mpeg Noise Reduction; Using The Game Mode Feature - Toshiba 40RV525U Owner's Manual

Using CableClear ®
®
The CableClear digital noise reduction feature allows you
to reduce visible interference in your TV picture. This may
be useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
1
and open the Video menu, highlight Noise
Press
Reduction and press
2
In the CableClear field, select your desired setting.
Note:
• If the current input is ANT/CABLE, VIDEO 1, or
VIDEO 2, the menu will display the text "CableClear."
The available selections are Off, Low, Middle, and
High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2,or HDMI 3 the menu will display
the text "DNR." The available selections are Off, Low,
Middle, and High. Low, Middle, and High will reduce
the noise in varying degrees, from lowest to highest,
respectively.
3
To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and
press .

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High. Off
is automatically selected when this feature is disabled ("grayed
out").
To select the MPEG noise reduction level:
1
Press and open the Video menu.
2
Highlight Noise Reduction and press
3
to highlight the MPEG Noise Reduction
Press or
field, and then press
Middle or High.
4
To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and
press .
Chapter 7: Using the TV's advanced features
digital noise reduction
.
.
to select either Off, Low,
or

Using the Game Mode feature

You can use the Game Mode feature for shorter frame delays
when playing a video game requiring split-second timing
between the on-screen display and input from the controller
(such as music creation and high-action games).
This feature is more effective for 480i and 1080i input signals.
Note: To use the Game Mode feature, the current video input
must be Video 1, Video 2, ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2, or HDMI 3. The Game Mode cannot
be turned on when any other video input is selected.
To turn on Game Mode:
1
and open the Video menu.
Press
2
Press or
press .
3
Press or
To turn off Game Mode:
Select Off in step 2 above, change the video input, or turn the
TV off and then on again.
Note: You can change the video input by pressing
remote control (
.
.
to highlight the Game Mode and then
to select On and then press
page 35).
.
on the
53