Tv Front And Side Panel Controls And Connections - Toshiba 40RV525U Owner's Manual

TV front and side panel controls and connections

Model 40RV525U is used in this manual for illustration purposes.
1 Green LED and TOSHIBA Logo LED
Power LED(Green) = Power indicator
TOSHIBA Logo LED= On or Off (
2 Remote sensor — Point the remote control toward this
remote sensor ( "Remote control effective range" on
page 21).
3 VIDEO-2 IN — The side panel A/V connections are
referred to as "VIDEO 2" and include standard A/V
connections.
4 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
5 ARROWS
— When a menu is on-screen, these
buttons function as up/down/left/right menu navigation
buttons.
6 MENU (ENTER) — Press to access the menu system (
pages 28–29). When a menu is on-screen, the MENU
button on the TV's control panel functions as the ENTER
button.
10
Chapter 1: Introduction
7
8
page 30).
9
10
EXIT — Press to instantly close an on-screen menu.
CHANNEL
— When no menu is on-screen, these
buttons change the channel (programmed channels only;
page 31).
VOLUME
— These buttons adjust the volume level.
INPUT — Repeatedly press to change the source you are
viewing (ANT/CABLE, VIDEO 1, VIDEO 2, ColorStream
HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, PC).