Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 40RV525U Owner's Manual

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Lower contrast for darkened room (factory
Movie
setting)
Designed for viewing of PC tables and
PC
documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC inputs only
(grayed out for other input sources).
To select the picture mode using the menu system:
1
and open the Video menu.
Press
2
Highlight Mode and press
Video
Mode
Picture Settings
Noise Reduction
Game Mode
Theater Settings
3
Press or to select the picture mode you prefer and
press .
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
42
Chapter 6: Using the TV's features
.
Sports
Off

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
Selection Pressing
Contrast lower
Backlight* darker
DynaLight** On/Off
Brightness darker
Color paler
Tint reddish
Sharpness softer
Backlight
*
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
** DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
To adjust the picture quality:
1
and open the Video menu.
Press
2
Highlight Picture Settings and press
3
Press or to select the picture quality you want to
adjust (Contrast, Backlight, DynaLight, Brightness, Color,
Tint, or Sharpness), and then press
setting, as described in the table above.
4
To save the new settings, highlight Done and press
You can use any of the picture modes (
picture mode," above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight Reset and press
The picture qualities you adjusted are automatically saved in
the Preference mode (
left) until Reset is selected.
Pressing
higher
lighter
On/Off
lighter
deeper
greenish
sharper
.
or to adjust the
"Selecting the
"Selecting the picture mode," above
.
.