Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View; Tuning Channel; Favorites Browser - Toshiba 26AV500U Owner's Manual

Selecting the video input source
to view
To select the video input source to view:
1
Press
~
on the remote control or TV control panel.
2
And then either:
a) Press numeric key 0-7 directly; or
b) Repeatedly press'"
T
on the remote control and then
press @ to change the input; or
c) Repeatedly press ~ on the remote control or TV
control panel to change the input.
Note:
• "No Signal" will appear randomly on the screen if no signal
is received in video input mode.
Tuning channel
Favorites Browser
The Favorites Browser allows you to quickly set up a favorite
channels list and let you jump to prefer channel easily (Highlight
Channel number then press @).
To add a favorite channel:
1
Tune to the channel number that you prefer.
2
Press
FAV BROWSER
button, a new set of Favorite Channel
Set Menu will appear as below.
3
Press
~
button to add the current display channel to
favorite browser list.
To delete a favorite channel:
1
Press FAVBR~WSER button to open the favorites channel set
menu.
2
Press ...
T
buttons to highlight the channel then press ....
button to delete it.
Tuning to the next programmed channel
To tune to the next programmed channel:
Press
~
or
~
on the remote control or TV control panel.
Note: This feature will not work unless you program channels
into the TVs channel memory (u:? page 30).
Tuning to a specific channel (programmed
or unprogrammed)
Thning analog channels:
Press the Channel Number
(0-9)
on the remote control. For
example, to select channel 125, press 1,2,5, then
@.
Thning digital channels:
Press the Channel Number
(0-9)
on the remote control,
followed by the dash (@) button and then the sub-channel
number. For example, to select digital channel 125-1, press 1,
2,5, -, I, then@.
Note:
If
a
digital channel is not programmed-either through
the automatic channel scan (u:? page 30) or the channel
add/delete function (u:? page 30)-you will have to tune the
RF channel using the Channel Number and dash
«W)
on the
remote control.
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (@) button if selecting a digital
channel).
3
Press
CHSN
on the remote control. The previous channel
will display. Each time you press
CHOTN,
the TV will switch
back and forth between the last two channels that were
tuned.