Using The Gametimer; Using The Control Panel Lock Feature; Using The Pc Settings Feature - Toshiba 40RV525U Owner's Manual

Using the GameTimer

You can use the GameTimer to set a time limit for playing a
video game (30–120 minutes). When the GameTimer expires,
the TV enters Input Lock mode and locks out the input source
for the video game device..
To set the GameTimer
1
From the Locks menu, press
entering screen.
2
Enter your four-digit PIN code and press
3
Press to highlight GameTimer and press .
4
Press or to select the length of time until the Input
Lock is activated (30, 60, 90, or 120 minutes) and press
.
To cancel the GameTimer
Select Off in step 4 above.
To deactivate the Input Lock once the GameTimer
has activated it:
Set the Input Lock to Off (
as described above).
Note:
• A message will appear when 10 minutes, 3 minutes, and 1
minute remain on the GameTimer.
• If the TV loses power with time remaining on the GameTimer,
when power is restored the TV will enter Input Lock mode (as
if the GameTimer had been activated) and you will have to
deactivate the Input Lock (as described above).

Using the control panel lock feature

You can lock the control panel to prevent your settings from
being changed accidentally (by children, for example). When
the control panel lock is On, none of the controls on the TV
control panel will operate except POWER.
To lock the control panel:
1
and highlight the Locks menu icon.
Press
2
Press to display the PIN code entering screen.
3
Enter your four-digit PIN code and press
4
to highlight Control Panel Lock.
Press
5
Press and or
the control panel is locked and any button on the control
panel (except POWER) is pressed, the message "NOT
AVAILABLE" appears.
Locks
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Contont Panel Lock
GameTimer
New PIN Code
To unlock the control panel:
Highlight Off in step 5 above, or press and hold the VOLUME
– button on the TV control panel for about 10 seconds until
the volume icon appears.
Chapter 6: Using the TV's features
®
:
®
to display the PIN code
.
® :
"Using the input lock feature"
.
to highlight On and press
Off
Off
Off
Off
Off On

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut off, readjust the Horizontal
Position and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling Clock.
To adjust the PC settings:
1
Repeatedly press
( "Selecting the video input source to view" page 35).
2
Press
3
Highlight PC Settings and press
®
Note: If a PC is not connected or there is no pc input
signal, this feature will be grayed out in the Setup menu.
4
Press
5
Press
Note: The screen is disrupted momentarily when adjusting
the PC settings. This is not a sign of malfunction.
Mode
Horizontal
Position
. When
Vertical
Position
Clock Phase
Sampling
Clock
Auto Adjust
The default settings may vary depending on the input signal
*
format.
to select PC input mode
and open the Setup menu.
or to highlight the item you want to adjust.
or to make the appropriate adjustments.
PC Settings
Horizontal Position 0
Vertical Positio n 0
Clock Phase 0
Sampling Clock 0
Auto Adjust
Reset Done
Description
Moves the picture left/right.
The adjustment range is within ±50 from center.*
Moves the picture up/down.
The adjustment range is within ±10 from center.*
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±16 from center.*
Helps to reduce noise and minimize periodic
vertical stripes on the screen.
The adjustment range is within ±10 from center.*
Highlight this item then press
optimum adjustment automatically.
.
to get an
49