Setting The Channel Tuning Mode; Tuning To The Next Programmed Channel; Tuning To A Specific Channel (Programmed Or Unprogrammed); Switching Between Two Channels Using Channel Return - Toshiba 40XV648U Owner's Manual

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be
handled for analog and digital channels when the TV is
in Antenna mode.
Note: To use this feature, ANT/CABLE In must be set to
Antenna (- page 28).
The channel tuning mode has three options.
Mode Description
Both analog and digital channels can be
Standard
tuned normally
Digital channels will have priority
when manually entering a channel
Auto number using the Channel Numbers (0-
(default) 9) on the remote control, analog
channels can still be tuned by < / , if
available
Digital Only digital channels can be tuned
To set the Channel Tuning Mode:
1
From the SETUP menu, highlight TV Settings and
press T.
2
Press B or b to highlight Channel Tuning Mode.
3
Press C or c to select your desired mode and then
press O.
Note: The Channel Options window as well as the
Channel Browser ANT/CABLE List will be updated
automatically when you change the mode. Also, the
History List will be cleared, but the Favorites List will be
saved.
Tuning to the next programmed
channel
To tune to the next programmed channel:
Press < or , on the remote control or TV control panel.
Note:This feature will not work unless you program
channels into the TV's channel memory (- page 28).
XV648U_09C06.pdf 4
Chapter 6: Using the TV's features
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote control.
For example, to select channel 125, press 1, 2, 5, then T.
Tuning digital channels:
Enter the major Channel Number (0–9) on the remote
control, followed by the dash (=) button and then the
sub-channel number. For example, to select digital
channel 125-1, press 1, 2, 5, –, 1, and then T.
Switching between two channels
using Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (=) button if needed).
3
Press R on the remote control. The previous
channel will display. Each time you press R, the
TV will switch back and forth between the last two
channels that were tuned.
Note: If you press R from a non-antenna input, the
TV will return to the last-viewed input.
Switching between two channels
using SurfLock
The SurfLock
channel to the R button, so you can return to that
channel quickly from any other channel by pressing
R. To memorize a channel to the R button:
1
Tune the TV to the channel you want to program
into the R button.
2
Press and hold R for about 2 seconds until the
message "Memorized" appears on-screen. The
channel has been programmed to the R button.
3
You can then change channels repeatedly, and
when you press R, the memorized channel will
be tuned.
The TV will return to the memorized channel one time
only. Once you press R and then change channels
again, the CH RTN memory will be cleared and the
button will function as Channel Return, by switching
back and forth between the last two channels that are
tuned.This feature also works for external inputs.
™
™ feature temporarily "memorizes" one
35
2009/07/10 11:25:46