System Setup; System Mode; Dmx Mode - Techni-Lux UltraLED Series Manual

► System Setup [new software]
This mode is designed for factory to upload software through USB port. Your product has been
tested before shipment. Check with local distributor or dealer's web site if updated software is
available.
► System Mode [ xxx ]
Press MENU button until display reads "System Mode [XXX]", then use UP/DOWN button to
scroll through" DMX, Slave, Auto, Sound.

► DMX Mode

In DMX mode, each output port takes up 6 DMX channels. You can address all ports at the
same starting channel to control the whole system simultaneously. Or you can address each
port individually.
1. Press Menu button until display reads "System Mode [ xxx ] ", then use Up/Down button to
select [DMX] and press Enter button. LCD display reads:
2. Use Enter to switch between Port and DMX_addr.
3. Use Up/Down to select port number and set DMX address.
When addressing each port individually, choose the start channel for each port and avoid
overlapped channels. Unexpected error may occur when channels are overlapped.
DMX Channels
CH1
Value:231-255
Sound Activation
Value:151-230 select of
Color Macro &
18 colors or
Auto programs 2 programs
Value:0-150
Red Intensity
Color mixing
Notes: When ch. 1 value is from 151 - 230, DMX value and functions of ch. 2 as below
1 - 12 13 - 25
red green
130 - 142 143 - 155 156 - 168 169 - 181 182- 194 195 - 207 208 - 220 221 - 233 234- 246 247- 255
sky- orange-
pink
blue
red
Port1 DMX_addr
[ 1 ]
CH2 CH3
speed
slow to fast
Green Intensity
0-100% 0-100%
26 - 38 39 - 51 52- 64
blue yellow magenta
pale-
chocolate
green
001
CH4 CH5
Strobe:
21-255 slow to fast
0-20 no function
Strobe:
Blue Intensity
21-255 slow to fast
0-100%
0-20 no function
65 - 77 78 - 91
cyan white
light-
voilet
blue
8
CH6
Dimming
0-255 Intensity 100%
to 0
Dimming
0-255 Intensity 100%
to 0
92 - 103 104 - 116 117- 129
yellow
orange purple
green
step cross
gold
change fade