Operating Instructions; Menu Map - Techni-Lux UltraLED Series Manual

OPERATING INSTRUCTIONS

This Driver offers 4 working modes: Auto, Sound, DMX and Master/Slave mode
1. Connect the unit to mains supply.
2. Turn on power switch and and wait a few seconds until LCD display reads:
3. Use buttons on Control Panel to set up and operate.

Menu Map

System Mode
Menu
System Setup
[ new software ]
to update software
Menu Enter Up
Power
Control Panel
▪ Power indicator is lit up when unit is
powered on.
▪ DMX indicator is blinking when unit is
receiving DMX signal.
When navigating the menu:
Use "UP" button to move up.
Use "DOWN" button to move down.
Use "Enter" button to move right.
Use "MENU" button to move left.
Up
System Mode
[xxx]
Down
System Mode
System Mode
Down
DMX
System Mode
Port1 DMX_addr
Enter
[ DMX ] [ 1 ]
to set unit in Slave mode
[ Slave ]
Enter
[ Auto ]
step change
cross fade
Down
pattern + color
pattern + color
Sound Program
Enter
[ Sound ]
Sound Program
Up
Down
Sound Program
7
UltraLED
System Ready
Use Enter to switch between
Port and DMX_addr
Use Up/Down to select port number
001
and set DMX address
Prog 01 Prog01 Dimmer
Enter
Red
Enter
Prog 18 Prog18 Dimmer
Gold
Prog 19 Prog19 speed
Enter
Prog19 Dimmer
Prog 20
Prog 21
strobe
Prog22 speed
Prog 22 Enter
chasing
Prog22 Dimmer
Prog23 speed
Prog 23
Prog23 pattern
Enter
Prog 24
Prog22 Dimmer
Enter
[ 01 ]
Enter
[ 02 ]
Enter
[ 03 ]
000 - 255
000 - 255
01 - 10
001 - 255
01 - 10
001 - 255
01 - 10
01 - 16
Prog23 color
01 - 18
001 - 255
Sensitivity
[ 01 ]
Sensitivity
[ 01 ]
Sensitivity
[ 01 ]