Unit Linking; Dmx Background - Techni-Lux UltraLED Series Manual

Unit Linking

DL-ULEDDRIVER12R is designed for the UltraLED series range of products. To run your light
shows of one or more units using a DMX-512 controller or to run synchronized shows on two
or more units in master/slave operating mode, you need DMX cables to link the units from DMX
IN to DMX OUT.
DL-ULEDMR16LSS
DL-ULEDMR16INS
DL-ULEDBAR3TC6
DL-ULEDFLEX/TC
IMPORTANT!
1) The units are linked in serial. Open circuit will cause malfunction.
2) Always connect OUT-1 of Splitter with a ULED unit and OUT-2 to the next Splitter.
1
0
5
SPLITTER
DL-ULEDMR16TC9
DL-ULEDMR16TC3
DL-ULEDMR16CW3
DL-ULEDMR16WW3