Ld0.Vmmxu2 Three-Phase Voltage Measurement (2); Registers; Premapped Registers; Active Parameter Setting Group Read And Write - ABB RELION 611 Series Modbus Point List Manual

1MRS758336 B
2.3.2.8
Table 44:

LD0.VMMXU2 Three-phase voltage measurement (2)

BitA RegA
2.4
2.4.1
2.4.1.1
Table 46: Active parameter setting group - read and write
RegA Type Scale
2301 u16 1
REU611
Point List Manual
LD0.VMMXU2 Three-phase voltage measurement (2)
IEC 61850 name SA name
LD0.VMMXU2
.HiAlm.stVal HIGH_ALARM
.mcd
.HiWrn.stVal HIGH_WARN
.mcd
.LoWrn.stVal LOW_WARN
.mcd
.LoAlm.stVal LOW_ALARM
.mcd

Registers

Table 45: Explanations of columns in register tables
Column name Description
RegA Default 3X and 4X register address for the data.
Type Type of the register. The alternatives are u16, u32 (unsigned 16 and 32 bits integer)
or i16, i32 (signed 16 and 32 bit integer).
Scale Scale factor as default. Also, an adjustable offset value exists that is set to 0 by
default.
IEC 61850 Original IED data object identification. Described in the IEC 61850 format as Logical
name Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the
same as the application function block name.
SA name The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information. Also,
if a register is writable, it is stated here.
Values The value range of the original IEC 61850 value, that is, before scaling.

Premapped registers

Active parameter setting group read and write

IEC 61850 name
LD0.LLN0
ActSetGr.Oper.ctlVal
Description
High alarm
High warning
Low warning
Low alarm
SA name Description
Active setting group
Section 2
Modbus data mappings
Values
1 = Alarm
1 = Warning
1 = Warning
1 = Alarm
Values
1...6
29