East Tester ET4501 User Manual page 20

ET4501/4502/4510 台式 LCR 数字电桥操作手册
4.2.17 Correction Function
Correction Description
Function
Open

circuit
correction
Compensation
stray
caused by test fixture

Short Compensate for the
circuit residual impedance
correction caused by the test
fixture
Open/sho Compensate for the
rt circuit stray admittance and
correction residual impedance
caused by the test
fixture
Step 1: Press the
Fig.4-17. If you do not want to perform correction, press the Main parameter function
key to exit. In this mode, only the
are valid. (Open circuit: OPEN, short circuit, SHORT, neither: ERROR). Connect the test
fixture to the gold plated short circuit board (short circuit) or disconnect the outside of the fixture
(open circuit).
杭州中创电子有限公司
Fig 4-16
Typical Use
High impedance
measurement
for
admittance
Low impedance
measurement
Precision measurement
key to enter the correction interface. The interface is as shown in
key and the Main parameter function key
Model
----
17