Selecting The Cinema Mode (480I And 1080I Signals); Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba Regza 32CV510U Owner's Manual

Selecting the cinema mode
(480i and 1080i signals)
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the Video 1, Video 2, ColorStream
HD1, ColorStream HD2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.
To set the Cinema Mode to Film:
1
From the Video menu, highlight Theater Settings and
press T.
2
In the Cinema Mode field, select Film.
3
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To set the Cinema Mode to Video:
Select Video in step 2 above.

Using the FREEZE feature

To use the FREEZE feature:
1
When viewing the TV, press B to make the picture a
still picture.
2
To return to the moving picture, press B again.
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws
of the United States and other countries, and may subject
you to civil and criminal liability.
Chapter 6: Using the TV's features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from the following
modes, as described below.
Mode
Sports
Standard
Movie
PC
Preference
Note: PC mode is available for HDMI and PC inputs only
(grayed out for other input sources).
1
From the Video menu, highlight Mode and press T.
2
Press B or b to select the picture mode you prefer and
press T.
Note: The picture mode affects the current input only.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
Selection
Contrast
Backlight*
DynaLight**
Brightness
Color
Tint
Sharpness
* Backlight
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
**DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
Picture Quality
Bright and dynamic picture
Standard picture settings
Lower contrast for darkened room
Designed for viewing of PC tables and
documents
Your personal preferences
Pressing C Pressing c
lower higher
darker lighter
On/Off On/Off
darker lighter
paler deeper
reddish greenish
softer sharper
(continued)
41