Labeling Channels - Toshiba Regza 32CV510U Owner's Manual

To revert to your original settings:
Highlight Cancel and press T before saving.
To remove all channels from the channel memory:
Highlight Reset and press T, and then highlight Done and
press T.
To remove encrypted channels from the channel
memory:
If an encrypted channel is accidentally added to the channel list
by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tune into an encrypted channel, the
following message will appear.
Digital Channel Is Encrypted - Press 1 on remote to remove channel
Press 1 while the message is on the screen to remove the
unnecessary channel from the channel list.
30
Chapter 5: Setting up your TV

Labeling channels

A list of common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the Channel
Labeling window. If the desired channel label is not provided
in the list, you will be able to manually enter/edit labels using
the software keyboard.
To assign channel labels:
1
From the Preferences menu, highlight Channel
Labeling and press T.
The Channel Labeling window opens.
2
Press < or , to select the channel you want to label.
3
Press C and Bb to highlight the desired channel label and
press T.
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and press T.
The maximum number of labels that can be stored is 128.
To remove channel labels:
1
Open the Channel Labeling window.
2
Press < or , to select the channel for which you want to
remove the label.
3
Press C and Bb to highlight No Label and press T.
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and press T.
If the desired channel label is not available from the list of
presets, you can create a custom label.