Selecting The Cinema Mode (480I And 1080I Signals); Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba Regza 32RV530U Owner's Manual

Selecting the cinema mode
(48Di and 1DaDi signals)
.......................................................................................................................................................................................
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the Video 1, Video 2, ColorStream
HD1, ColorStream HD2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode
to
Film.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from the following
modes, as described below.
Note: PC mode is available for HOMI and PC inputs only
(grayed out for other input sources).
1
From the Video menu, highlight Mode and press @.
2
Press ... or T to select the picture mode you prefer and
press@.
Note: The picture mode you select affects the current
input only. You can select
a
different picture mode for
each input.
To set the Cinema Mode to Film:
1
From the Video menu, highlight Theater Settings and
press@.
2
In the Cinema Mode field, select Film.
3
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press@.
To set the Cinema Mode to Video:
Select Video in step 2 above.
Using the FREEZE feature
..............................................................................
To use the FREEZE feature:
Sports
Standard
Movie
PC
Preference
Bright and dynamic picture
Standard picture settings
Lower contrast for darkened room
Designed for viewing of PC tables and
documents
Your personal preferences
1
When viewing the TV, press
FR8zE
to make the picture a
still picture.
2
To return to the moving picture, press
FR8zE
again (or any
other button).
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws
of the United States and other countries, and may subject
you to civil and criminal liability.
I
42
Adjusting the picture quality
You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
Contrast lower higher
Backlight* darker lighter
DynaLight** On/Off On/Off
Brightness
darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
*
Backlight
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to O.
(Settings are stored in memory.)
**DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.