Connecting A Personal Computer (Pc) - Toshiba Regza 32CV510U Owner's Manual

Connecting a personal computer
(PC)
With either the PC IN or HDMI connection, you can watch
your computer's display on the TV and hear the sound from the
TV's speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV, use an
analog RGB (15-pin) computer cable and a PC audio cable.
TV upper back panel
Computer
PC audio
output
Conversion adapter
(if necessary)
To use a PC, set the monitor output resolution on the PC
•
before connecting it to the TV. The PC IN terminal can
accept and display VGA, SVGA, XGA, WXGA, and SXGA
signal formats. For detailed signal specifications, see page
61.
To display the optimum picture, use the PC setting feature
•
( - "Using the PC settings feature" on page 49).
Note:
• The PC audio input terminals on the TV are shared with the
COLORSTREAM HD2 and HDMI 1 analog audio input
terminals (- page 49).
• Some PC models cannot be connected to this TV.
• An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD's title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
18
Chapter 2: Connecting your TV
PC audio
cable
Signal names for mini D-sub 15-pin connector
•
Signal
Pin No. Pin No.
name
1 R 6
2 G 7
3 B 8
4 NC * 9
5 NC 10
*NC=Not connected
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the TV, use
an HDMI-to-HDMI adapter cable and a PC audio cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). Separate PC audio cable is not necessary
(- page 15).
TV upper back panel
Computer
PC audio
output
The HDMI input can accept and display VGA, SVGA, XGA,
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz),
1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For
detailed signal specifications, see page 61.
Note:
• The edges of the images may be hidden.
• If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or
1080p signal program, Native mode scales the video to
display the entire picture within the borders of the screen
(i.e. no overscanning).
Signal Signal
Pin No.
name name
Ground 11 NC
Ground 12 NC
Ground 13 H-sync
NC 14 V-sync
Ground 15 NC
PC audio
cable