Selecting The Cinema Mode (480I And 1080I Signals); Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba Regza42RV535U Owner's Manual

Adjusting the picture quality
You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to
your personal preferences.
1
From the Video menu, highlight Mode and press @.
2
Press. or • to select the picture mode you prefer
and press@.
Note: The picture mode you select affects the current
input only. You can select
a
different picture mode for
each input.
Bright and dynamic picture
Lower contrast for darkened room
Your personal preferences
Designed for viewing of PC tables and
documents
Designed for viewing of media from a
Toshiba REGZA LINK Pc.
Automatically adjusts picture settings
based on ambient light conditions and
input signal content
Standard picture settings
Contrast
lower
higher
Backlight* darker lighter
DynaLight** On/Off On/Off
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness
softer sharper
Preference
PC
PC Fine
Movie
AutoView
Standard
Sports
Note:
• PC mode is available for HOMI and
PC
inputs only (grayed
out for other input sources).
• PC Fine mode is only available when on an HOMI input with
Enable REGZA LINK set to On and a Toshiba REGZA LINK
PC
connected
(~page
54).
• Because the Auto View mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, most items in the Picture Settings and Advanced
Picture Settings menus are grayed out when it is selected.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws
of the United States and other countries, and may subject
you to civil and criminal liability.
Using the FREEZE feature
Selecting the picture mode
You can select your desired picture settings from the
following modes, as described below.
1
When viewing the TV, press
FR~E
to make the picture
a still picture.
2
To return to the moving picture, press
FR~ZE
again (or
any other button).
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
To use the FREEZE feature:
Adjusting the picture
When you view a DVD (3:2 pulldown processed) from a
DVD player connected to the Video 1, Video 2,
ColorStream HD1, ColorStream HD2 (component
video), or HDMI inputs on the TV, smoother motion can
be obtained by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
1
From the Video menu, highlight Theater Settings
and press@.
2
In the Cinema Mode field, select Film.
3
To save the new settings, highlight Done and press
@.
To revert to the factory defaults, highlight Reset and
press@.
To set the Cinema Mode to Video:
Select Video in step 2 above.
Selecting the cinema mode
(48Di and 1D8Di signals)
• Backlight
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to O.
(Settings are stored in memory.)
.. DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
(continued)
43
I