Selecting Stereo/Sap Broadcasts; Adjusting The Audio Quality; Turning Off The Built-In Speakers - Toshiba Regza 32CV510U Owner's Manual

Selecting stereo/SAP broadcasts

The Multi-Channel TV Sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
Second Audio Program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
"STEREO" or "SAP" appears on-screen when E is pressed.
The MTS feature is only available for analog signals on the
ANT/CABLE input (- page 53).
To listen to stereo sound:
1
From the Audio menu, highlight Audio Setup and press
T.
2
In the MTS field, select Stereo.
3
To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Note:
• You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to an alternate language on an ATSC digital
station (if available):
Highlight the Language field in step 2 above, and then press
C or c to select the language you prefer.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 2.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
44
Chapter 6: Using the TV's features

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1
From the Audio menu, highlight Audio Settings and
press T.
2
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
3
Press C or c to adjust the level.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
4
To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.

Turning off the built-in speakers

You can use this feature to turn off the TV speakers when you
connect an audio system to your TV (- "Connecting a digital
audio system" and "Connecting an audio system" on page 17).
To turn off the built-in speakers:
1
From the Audio menu, highlight Audio Setup and press
T.
2
In the Speakers field, select Off.
3
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To turn on the built-in speakers:
Select On in step 2 above.